FS-EN417-HEAD-RODS
EN417 Torch Head + Test Brazing Rods (Aluminium & Copper)
The same 1300°C EN417 head, supplied with a test pack of aluminium and copper brazing rods. The point is to prove it on your own work before committing to bulk: light it, braze a scrap joint, and judge the finish yourself. Rods travel alongside the head, so one order gets you both. Screws onto a standard EN417 butane cartridge - no cylinder, no hose.
Cartridge not standard EN417? Send details → /contact/. Tell us the metals you join and we will confirm the right rod for the job.
Sizes
| SPEC | VALUE |
|---|---|
| Max flame temperature | 1300°C |
| Body material | Iron + zinc alloy |
| Ignition | Electronic piezo |
| Flame stabilisation | Built-in air-mix fan |
| Net weight | 95 g (head) |
| Fuel | Butane (EN417 cartridge, not included) |
| In the box | Torch head + test pack of aluminium and copper brazing rods |
| Rod diameter, alloy & pack count | Confirmed in your quote |
| Carton pack | 100 pcs (head) |
Fits these torch models
Not sure your model is covered? Send it to us and we'll confirm the right part before you order - free fit matching.
Ask About Your ModelSpecification
- Iron and zinc-alloy body
- Electronic piezo ignition - no flint wear
- Built-in air-mix fan for a stable flame in draughts
- Aluminium and copper brazing rods supplied as a test pack
- RoHS/REACH statement in About
- Check local gas-appliance rules before fitting (EU/UK GAR applies to gas appliances; this is a spare part)
Pairs well with
FS-EN417-HEAD
EN417 Torch Head (1300°C, Cartridge Torch)
The hot head of the EN417 range, on its own. Electronic piezo ignition fires it with one thumb, a built-in air-mix fan holds the flame steady in draughts, and the burner reaches 1300°C - hot enough for metal-tube soldering, small brazing jobs and workshop heating that defeats ordinary heads. It threads straight onto a standard EN417 butane cartridge: no cylinder, no hose, nothing pressurised in the post.
FS-EN417-HEAD-KIT
EN417 Torch Head + Service Kit (Spare Seals & Screwdriver)
The same 1300°C EN417 head, with the two things that keep a cartridge torch working: replacement seals and a repair screwdriver. The seal at the cartridge joint is the part that ages first - it hardens, stops sealing and the torch starts hissing at the valve. With a spare seal and the right driver in the box, that is a two-minute fix instead of a replacement torch. Threads onto any standard EN417 butane cartridge.
FS-BRAZING-RODS
Brazing Rods - Aluminium & Copper (Sold Separately)
The rods on their own, once you already run a cartridge torch. Low-temperature aluminium and copper rods that braze at the kind of heat a 1300C butane torch gives you - the same rods that ship in our head-and-rods pack, so if you proved the flame there, this is the top-up order. Tell us the metals you join and we confirm rod diameter, alloy and pack count in your quote.
Questions
What rod sizes are in the pack?
Tell us the metals you join - copper tube, aluminium sheet, mixed metals - and we will confirm rod diameter, alloy and pack count in your quote. The test pack exists so you can prove the finish on your own scrap before ordering bulk.
Will the head braze aluminium?
The burner reaches 1300°C, which is the top of the range for cartridge torches and enough for low-temperature aluminium brazing rods on small sections. For structural aluminium work you need oxy-fuel - tell us the job and we will say honestly whether this torch does it.
Are the rods sold separately?
Yes, once you know the rod you want - the test pack is for proving the flame. Ask for bulk rod pricing on the inquiry form.
Is a cartridge included?
No. We never ship gas: the head runs on standard EN417 butane cartridges bought locally.
Can't find your fit? Send us your torch model - we'll match it for free.